Vibration Function Switch
In the power-on status, ip the vibration switch down, the vibration function
will be turned on (the white LED stays on inde nitely), and the headphone will
vibrate with the bass. The stronger the bass, the stronger the vibration. Flip the
vibration switch upward to turn o the vibration (the white LED goes out), then
you can listen to music and play games normally, the vibrating speaker will not
work, and the music speaker will work normally.
Colorful Decoration LED Switch
After the headphones turn on, the colorful LED light will turn on automatically.
If you want to turn o
the colorful LED light for saving battery or for other
reasons, short press the volume up and volume down button simultaneously to
turn the LED o . The colorful LED can be restarted after turned o .
*Note: The colorful LED light will not work while the headphone is in charging
or in wired mode.
Boom Microphone
Equipped with the long boom microphone for a better call experience. The long
boom mic is to enhance the call performance. During a call, if you want to talk
to others, or you don't want to be heard by the person on the other end of the
phone, short press the mute button on the microphone to stop the mic from
working.
When the mute is turned on, the headphone will beep. When you need to
resume the call, short press the mute button again.
Auto o and Long-distance Reconnect
The headphone will be disconnected automatically when out of the e ective
range. When back to e ective range within 5 minutes, it will auto-connect with
your phone. The headphone will turn o automatically if out of the e ective for
range over 5 minutes.
EN
4