Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
30
> Ensure that the shut off valve
is completely turned off before
connecting water.
33
15 psi - 70 psi
> Verify incoming water pressure is
between 15 psi and 70 psi
31
> Purge the water line into an empty
bucket to ensure any debris is
cleared out of line.
34
2
1
> Replace actuator cover.
32
2
1
> Apply Teflon around threads and
connect piping.
35
> Install protective shield on actuator.
> Finish the wall around the shield
and cut even to finished surface.
70300131_Mounting_Wall carrier_standard
11
Publicidad
Tabla de contenido
