DURAVIT DuraSystem WD1022 Instrucciones De Montaje Y Uso página 8

Bastidor de pared estándar
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

12
> Inspect carrier to ensure it is secure
and even.
> Continue with 21
15
> Drill out 2 marked ¼" anchor holes
in the carrier base.
8
70300131_Mounting_Wall carrier_standard
13
21
> Position carrier in frame to level.
> Adjust feet height as needed.
16
ø ¼"
2x M10
> Secure carrier feet in place within
the frame using metal frame bolts.
14
> Position carrier in the prepared
> Carrier face plate must be flush
17
2x 8,4
2x 8x70
> With anchor bolts set, ensure
> Adjust as needed before installing
opening.
with the front of the surrounding
studs to accomplish maximum
support for the wall sheeting
(applied later).
carrier is flush to metal frame
front.
side metal screws.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wd1022 000 090Wd1022 000 091

Tabla de contenido