General Advice; Instructions For The Installation - BIEMMEDUE AS 3 Manual De Instrucciones

Before using the dryer, please read carefully all the instructions for use described below and follow the indications
scrupulously. The manufacturer cannot be held responsible for damage to persons and/or property caused by improper
use of the equipment.
This instruction manual is an integral part of the equipment and must therefore be kept carefully and passed on with the
unit in the event of a change of ownership.
DESCRIPTION
Professional mobile dryers are exclusively intended for use to dry
motor vehicles interiors.
Air is taken in by a fan, heated when passing electric heating
elements and then released back into the environment to be
heated.
The dryers are made of steel sheets and provided with a double
wall to increase the machine efficiency and to limit the external
walls temperatures.
They are also suitable for using only on the floor.

GENERAL ADVICE

Installation, setting and use of the machine must be performed
in compliance with current regulations and laws related to use of
the machine.
General guidelines:
• follow the instructions in this booklet very carefully;
• do not position the dryer near wash systems and/or
containers of water and in any case so that the controls and
switches are accessible to the person who is in contact with
water;
• do not place the dryer immediately under a fixed wall socket;
• the dryer must be placed on a stable surface to prevent it
from overturning;
• easily flammable materials should not be placed near the
machine;
• the dryer must not be covered with cloths or similar items;
Warning
DO NOT COVER THE DRYER, IT MAY OVERHEAT
• make sure dryer is checked before starting it and regularly
monitored during use. Keep children and animals away from
it;
• After use, make sure the disconnector is off.
Warning
This machine is not considered suitable for use by
persons with reduced physical, sensory or mental
capacities or with no experience and familiarity with it,
unless they are supervised or instructed on how to use
the equipment by a person responsible for their safety.

INSTRUCTIONS FOR THE INSTALLATION

Warning
The installation must be performed by authorised
personnel and in compliance with current safety
regulations.
L-L303.00-BM
EN
IMPORTANT
Warning
• The dryer power line must be earthed and fitted with a
• The dryer plug must be inserted into a socket equipped
Before switching on the dryer and, therefore, before plugging it
into the electrical power supply, check that the power supply
specifications are the same as those stated on the identification
plate.
OPERATING INSTRUCTIONS
To start the machine press the button (1) and then turn the
selector (2) to the desired position:
• HEATING AT MINIMUM POWER
o Turn the selector (2) to the position
• HEATING AT MAXIMUM POWER
o Turn the selector (2) to the position
• ONLY VENTILATION
o Turn the selector (2) to the position
Warning
In heating mode, the fan starts while the heating
elements are heating.
To switch off the machine:
Turn the rotary switch (2) to position
•
• Wait 1 minute for complete cooling
• Press the green main switch (1) to position "0"
Warning
This model is not equipped with a cooling ventilation
function after switching off.
It is necessary to wait until the residual heat accumulated
by the heating elements has completely dissipated
before switching off the dryer and removing it or putting
any object near it.
LIMIT THERMOSTAT WITH MANUAL RESTART
The dryer has a built-in temperature-limit thermostat that will
stop the power supply in case of overheating. If the thermostat
trips, disconnect the power supply, wait until the dryer has cooled
and fix the problem that caused the overheating.
The thermostat is reset by unscrewing the protection cap and
pressing the button (2).
residual current circuit breaker.
with a switch disconnector.
;
10 / 18