Troubleshooting - BIEMMEDUE AS 3 Manual De Instrucciones

MAINTENANCE
Warning
Before doing any maintenance:
• stop the dryer;
• switch off the power supply by means of the
disconnector on the electrical panel;
• wait until the dryer cools.
For the dryer to operate efficiently, cleaning operations must be
carried out regularly. An accumulation of dust and dirt may result
in overheating and fire.
DISPOSAL
At the end of its working life, this machine is to be scrapped and
disposed of by handing it over to the local separate waste

TROUBLESHOOTING

FAULT
• The fan does not start
• The fan starts but the air does not heat
•
The dryer stops
L-L303.00-BM
EN
collection system pursuant to and in scrupulous compliance with
current legislation.
label bears this symbol
by Legislative Decree no. 151 of 25/07/2005 and directive
2003/96/EC on Waste Electrical and Electronic Equipment (WAEE).
collection system for electrical and electronic products and comply
with its requirements.
may result in serious harm to the environment and human health,
and may be subject to penalties from local authorities.
CAUSE
• No power supply
• Motor winding burnt or interrupted
• The electric heating element does
not work
• The limit thermostat tripped
Before scrapping, check the machine's serial number label. If the
,
this means that disposal is regulated
You should therefore become apprised of the local waste
Improperly disposing of this product as normal municipal waste
• Check power specifications
• Check the operation and positioning of
the switch
• Replace motor
• Contact a service centre
• Identify the problem that caused the
overheating.
REMEDY
11 / 18