Publicidad
Idiomas disponibles
Idiomas disponibles
MATERIALS:
FDA approved blow-molded high-density polyethylene with Microban® antimicrobial.
Steel pivot rod in aluminum tube hinge mechanism. Textured seat surface with nylon
safety straps that extend over child's shoulders and between legs for security.
OPERATION:
Designed to mount on the wall of a restroom stall or a dressing room. Closed unit
folds to less than 6" (143 mm), and requires less than 2 sq. ft (600 sq. cm) of wall
space. High-density polyethylene is easy to clean and resists fungal and bacterial
growth. Can withstand static loads of 50 pounds (22.7 kilograms).
Warning: To ensure that the unit supports the intended loads, seat must be properly
installed according to the manufacturer's instructions.
SPECIFICATION:
Child Protection Seat body shall be durable, high-density polyethylene with
Microban® antimicrobial. Design of unit shall be surface-mounted. Seat shall be
secured to back plate with a steel pivot rod concealed in an aluminum tube hinge rod
mechanism. Unit shall have Microban® antimicrobial embedded into plastic material.
Seat shall have nylon safety straps. Unit shall support static loads of up to 50 lbs (22.7
kg) when properly installed. Unit shall be backed by manufacturer's 5-year limited
warranty on materials and workmanship and include a provision for replacement
caused by vandalism. Unit shall be manufactured in the U.S.A.
Publicidad
