Before Use; Product Assembly - cecotec Ready Warm 9870 Crystal Towel Manual De Instrucciones

ENGLISH

3. BEFORE USE

• Take the product out of the box.
• Remove all packaging materials. Keep the original box.
• Make sure all the components are included and in good conditions, otherwise,
contact the official Technical Support Service of Cecotec immediately.
• The unit has a pre-installed lithium CR2025 battery. Remove the protective film
to active the remote control battery.

4. PRODUCT ASSEMBLY

Wall assembly diagram
1. Drill (diameter <8 mm) two holes at each of the sides on the wall and insert the expanded
plastic pipes, then fix the brackets with the 4x35 mm fixing bolts. See the below diagram
for reference:
2. Use fixing bolts to fix the bracket to the wall, and then fix them with the nuts and washers.
See image 1.
3. The spacers are screwed onto the fixing bolts at the bottom and can be adjusted
accordingly. See image 2.
20 READY WARM CRYSTAL TOWEL 9870/9880/9890
1 2