cecotec Ready Warm 9870 Crystal Towel Manual De Instrucciones página 24

ENGLISH
The current room temperature is displayed on the left of the main display. The set target
temperature is shown on the right of the display
1. Set the desired temperature using the
2. The device will automatically turn off when the room temperature reaches the set one.
3. The device will automatically start operating again when room temperature drops 2 ºC
below the set one. It will operate at low heating power by default.
4. If room temperature drops 4 ºC below the set temperature, the device will automatically
activate high heating level.
Manual mode
The device can be operated manually at low or high heating level
1. Press the
2. EStart heating mode by pressing
heating power.
3. To exit the manually heating mode, press
Switch-off timer
In mode, you can set a countdown after which the heating process is automatically
switched off.
1. Pulse to display the current countdown (main display).
Note: After 10 seconds without input, the main display returns to the display of room and
thermostat temperature.
2. Press button to extend the countdown by one hour.
Child-lock safety system
The device includes a safety system to prevent children from activating the device by accident.
Once activated, the device does not respond when buttons are touched or pressed.
1. Press and hold the
2. The child lock indicator will light up when this function is activated.
24 READY WARM CRYSTAL TOWEL 9870/9880/9890
button to enter the
button for 3 seconds to activate or deactivate the child lock.
y buttons.
mode. The mode indicator will light up.
. Press again to switch between low and high
.