Nokia 6265 Manual Del Usuario página 79

S e t t i n g s
4. If required, enter the Bluetooth connectivity pass code of the device to pair
with the device.
Your phone connects to the device. You can start data transfer.
To view the device you are connected to, select
Connectivity > Bluetooth >Active
To deactivate Bluetooth connectivity, select
Bluetooth > Off. Deactivation of the Bluetooth technology connection will not
affect other functions of the phone.
Send data
Instead of using the
various types of data to other devices with Bluetooth connectivity. For example,
you can send a video clip from the
appropriate sections of the user guide for information about sending different
types of data.
Receive a data transfer
When a Bluetooth technology connection is active in your phone, you can receive
notes, business cards, video clips, and other types of data transfers from another
device with Bluetooth connectivity. When you receive a data transfer, an alarm
sounds, and a message appears in the start screen.
To view the transferred item immediately from standby mode, select Show.
To view the item at a later time, select Exit.
Depending on the nature of the item, it is saved in the appropriate menu in your
phone. For example, a business card would be saved in Contacts, and a calendar
note would be saved in Calendar.
Infrared connectivity
You can set up the phone to receive data through its infrared (IR) port. To use an
IR connection, transmission and reception must be to or from an IR compatible
phone or device.
Warning: Do not point the IR beam at anyone's eye or allow it to
interfere with other IR devices. This device is a Class 1 laser product.
Send and receive data
1. Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices.
The preferable distance between the two devices in an IR connection is from
3 inches to 3 feet.
78
device.
Connectivity menu, you can use other phone menus to send
Video clips
Menu > Settings
Menu > Settings >
folder of the Gallery
>
Connectivity >
menu. See the