Tele Radio T60 Manual De Instrucciones página 196

TROUBLE SHOOTING CHART
If the equipment is not working as it should, we would ask you to follow
the steps below.
FAULTY FUNCTION
The receiver does
not work when you
transmit.
The receiver's green
LED lights when you
transmit, but the re-
lays are not activated.
The receiver'sgreen
LED does not light
when you transmit.
The receiver's green
LED lights when you
are not transmitting.
The transmitter's LED
does not light when
you transmit.
The range istoo short.
-
If you have followed these instructions and still cannot get the radio system to work properly,
please contact your dealer.
196
POSSIBLE CAUSES
The receiver is incor-
rectly connected.
Incorrect operat-
ing voltage to the
receiver.
The codes in the
transmitter and
receiver do not cor-
respond, i.e., they are
not identical.
The battery is dis-
charged.
The transmitter is
damaged.
Another unit is trans-
mitting in the vicinity
on a similar frequency.
The battery is dis-
charged.
The transmitter is
damaged.
Bad battery.
Aerial cables are dam-
aged or incorrectly
installed.
REMEDY
Inspect receiver con-
nections.
Check the supply
voltage.
Check the coding.
Replace the battery.
Contact your dealer
.
Contact your dealer
.
Replace or charge the
battery.
Contact Tele Radio's
support.
Replace the battery.
Check the aerial
connection.