Inateck BR1003 Manual De Instrucciones página 7

2. Pair with two devices at the same time
In TX mode, BR1003 is able to pair with
two Bluetooth stereo earphones/speakers
at the same time. And both can play music
at the same time.
1) Follow the previous instructions in the "Pairing"
section to pair the BR1003 with your first device.
Turn off your first device after successfully
pairing it with the BR1003.
2) Tap the Multifunction Button twice to pair and
connect to your second device. Turn off the
BR1003 after successfully pairing it with your
second device.
3) Turn on your first device and wait for 10 to 20
seconds. Both of your devices are now ready
for pairing. Turn on the BR1003, the devices will
automatically connect in.
Note:
a. Please turn off the BR1003 and restart it to re-pair
if two devices cannot play music at the same
time. If the problem still exists after repeating
the whole steps above, please contact Inateck
Support at: support@inateck.com.
b. It is advised to switch off the Bluetooth
function of your other devices to avoid signal
interference.
c. We have performed the compatibility testing
with various Bluetooth chipsets on the market.
But please note not all these chipsets use the
same software, compatibility issue might still
encounter for some Bluetooth devices. Please
contact our customer support team for help.
d. BR1003 can automatically re-pair to the 2 most
recently connected devices.
6