Product Appearance - Inateck SA02001 Manual De Instrucciones

4.0 Product Appearance

USB 3.0 Port
Power Adapter Port
Tips: Blue hard drive indicator, red power indicator
5.0 Usage
1. Connect the external power adapter from the hard drive dock to an electrical outlet.
2. Connect the included USB 3.0 cable from the hard drive dock to an available USB port
on your computer。
3. Insert a 2.5" or 3.5" hard drive into the top loading slot.
4. Press the power button. A pop-up bubble in the task bar at the bottom-right of your
screen notifying you once your hard drive has been recognized.
6.0 Cautions
a. To remove the hard drive, make sure it is currently not being accessed by the computer
and then unmount or uninstall the disk drive from the operating system. Never remove
the docking station while the hard drive is in use. Doing so may corrupt the data on
the hard drive or damage the hard drive, docking station, or computer.
b. When connected via USB, the dock will automatically go into sleep mode if the
connection is left idle for more than 10 minutes. The blue light will then go off, and
recover from sleep mode when the hard drive resumes R/W.
Two-color LED Indicator
Power Switch
2