EASYHOME GT-FSI-07-US Manual Del Usuario página 13

Set de tomas de corriente radiocontroladas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Remote controlled wall sockets
6. If you would like to change or delete an assignment;
− first pull the remote controlled wall socket out of the permanently installed
socket and wait approx. 2 seconds.
− Insert the remote controlled wall socket back into the permanently in-
stalled socket to reactivate learning mode.
− Push the OFF button for the respective channel.
The indicator light for the remote controlled wall socket will then start to
blink quickly. The current assignment has been deleted.
− Now the learning mode will be reactivated and the indicator light will
blink slower again. Push the ON button for the desired channel.
The indicator light of the remote controlled wall socket will then illuminate
continuously and the new channel is assigned.
TIP:
The assignment of the channels is saved. Even if the remote
controlled wall socket is disconnected from the outlets, the
programmed settings are saved.
Exception: If you pull the remote controlled wall socket
out of the permanently installed socket after a very short
operation time, the assignment may be lost and must be
reconfigured.
7. To check whether the channels have been properly assigned, push the
respective ON button for the respective channel.
The indicator light for the remote controlled wall socket will light up.
t for the remote
8. Then switch the remote controlled wall sockets off again using the OFF button
he remote contro
he remote contro
for the respective channel.
pective channel.
ective channe
The indicator light for the remote controlled wall socket will no longer be
cator light for th
cator light for th
illuminated.
ted.
ted.
TIP:
T
T
IP
IP
You can switch all channels on or off at the same time with the
ON/OFF button
You have successfully installed the remote controlled wall socket.
AFTER SALES SUPPORT
USA
1-866-558-8096
disconnected fr
isconnected fr
s are saved.
e saved.
ull the remote co
ull the remote c
anently installe
ently installe
me, the assignm
the assignm
red.
hannels have be
nels have be
n for the respect
r the respe
the remote
6
/
7
for all channels.
Preparation
nnels is saved. Ev
s is saved. E
service@801service.net
USA
13

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Gt-900092770

Tabla de contenido