Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Remote controlled wall sockets
1. Make sure that the device you intend to connect and the corresponding outlet
are suitable for operation with a remote controlled wall socket. Observe the
notes in this chapter and in the chapter "Safety notes" in this respect.
2. Connect the desired device to the remote controlled wall socket.
Switching the remote controlled wall socket on and off
− Use the ON button
the remote controlled wall sockets on.
− Switch the remote controlled wall socket off with the
OFF button
2
/
3
− You can switch all channels on or off at the same time with the
ON/OFF button for all channels
Additional notes
Power failure
After a power failure, the memory for the system code and the respective channel
of the remote controlled wall socket may malfunction.
− In this case, pull the remote controlled wall socket out of the permanently
installed socket and do not connect it to the grid for at least 6 hours.
− Reassign the channels (see chapter "Assigning channels").
Radio frequency interference
nterference
Radio frequency interference may disrupt wireless communication between
erference may d
the receiver and the transmitter. It is not possible to switch the remote controlled
he transmitter. It
he transmitter. It
wall socket on or off during such a fault.
or off during su
or off during su
− Pull the remote controlled wall socket out of the permanently installed socket.
emote controlle
emote controlle
− Wait a few seconds and then connect it again.
w seconds a
w seconds a
Notes on range
The following factors may reduce the range:
• walls
• room ceilings
• garages
• adjoining buildings
• radio frequency interference
• buildings of any kind and vegetation
• conductive metal parts located near the devices or inside or near the trans-
mission path e.g. radiators, metallic insulated glass windows, reinforced
concrete ceilings, metal plated walls of prefabricated houses etc.
AFTER SALES SUPPORT
USA
1-866-558-8096
8
/
9
/
10
/
11
for the respective channel to switch
/
4
/
5
for the respective channel.
6
/
7
.
ystem code and t
m code and t
ay malfunction.
ay malfunction.
trolled wall sock
ed wall sock
onnect it to the g
ect it to the
e chapt
hapter "Assig
er "Ass
rference
rence may d
USA
Operation
15
service@801service.net
Publicidad
Capítulos
Tabla de contenido
