Axxess LC-BMRC-01 Instrucciones De Instalación página 3

INSTALLATION
With the key in the off position:
1. Connect the LC-BMRC-01 harness into the LC-BMRC-01 interface, and then to the wiring
harness in the vehicle.
2. Re-insert the fuse back into the fuse holder.
Note: If installing an ASWC-1, connect it after you initialize and test the LC-BMRC-01, with the
key in the off position.
PROGRAMMING
Attention! If the interface loses power for any reason, the following steps will need to be
performed again.
1. Cycle the engine on.
Note: If the radio doesn't come on within 60 seconds, turn the key to the off position,
disconnect the interface, check all connections, reconnect the interface, and then try again.
2. Cycle the ignition off, then back on.
3. Test all functions of the installation for proper operation.
REV. 1/22/2021 INSTLC-BMRC-01
3