Descargar Imprimir esta página

EarthQuaker Devices Arpanoid Manual De Instrucciones

Publicidad

Enlaces rápidos

<<< Suggested Settings >>>
3/4 Over 5/4 Sequence
... and On & On ...
Instant Shredder
Tape Edited Chord Sequence
www.earthquakerdevices.com
©2021 EarthQuaker Devices LLC
Hi buddies! Welcome to the first dedicated compact polyphonic pitch arpeggiator effect
pedal for electrical guitar! What does the Arpanoid
you play and transforms it into an adjustable ascending or descending scale. It features
8 intuitive and expandable modes and will work on complex chords as well as single
notes in any key. The Arpanoid has an all analog dry signal, all digital wet signal and true
bypass switching. Like all EarthQuaker Devices pedals, this dude is handmade one at a
time in sunny Akron, Ohio.
Controls
Rate: Adjusts the speed of the sequence.
Up/Up-Down/Down Toggle: Switch to control the direction of the sequence. All the way
left is up, the sequence will continually repeat going up. In the middle is up/down, the
sequence will continually repeat going up then back down. All the way right is down, the
signal will continually repeat going down.
Step: Selects how many notes there are in the sequence.
Wet: Level control for the effect signal. Unity is around noon.
Mode: 8 position selector switch to choose the octave and key:
1: Major: -1 octave to root.
2: Major: root to +1 octave.
3: Major: -1 octave through +1
4: Major: Random pattern
5: Minor: -1 octave to root.
6: Minor: root to +1 octave.
7: Minor: -1 octave through +1
8: Minor: Random pattern
Dry: Level control for the dry signal. Unity is around noon.
Helpful Tip
We suggest you treat your Arpanoid like a new instrument and take the time to learn how
it works. Once you understand how the Arpanoid will work for you, you'll receive a lifetime
of enjoyment from your new Device.
EQDARP2-EU-R2
<<< English >>>
Power
do? The Arpanoid takes whatever
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel.
We always recommend pedal-specific, transformer-isolated wall-wart power supplies
or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or
unclean power. Switching-type power supplies, daisy chains and non-pedal specific
power supplies do not filter dirty power as well and let through unwanted noise. DO NOT
RUN AT HIGHER VOLTAGES!
Current Draw: 65 mA
Input Impedance: 1 MΩ
Output Impedance: <1 kΩ
Flexi-Switch
®
Technology
This device features Flexi-Switch Technology! This relay-based, true bypass switching
style allows you to simultaneously use momentary and latching-style switching.
• For standard latching operation, tap the footswitch once to activate the effect and then
tap again to bypass.
• For momentary operation, hold the footswitch down for as long as you'd like to use the
effect. Once you release the switch, the effect will be bypassed.
Since the switching is relay-based, it requires power to pass signal.
Warranty
This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter
any issues, please visit www.earthquakerdevices.com/warranty.
O P E R A T I O N M A N U A L

Publicidad

loading

Resumen de contenidos para EarthQuaker Devices Arpanoid

  • Página 1 We always recommend pedal-specific, transformer-isolated wall-wart power supplies notes in any key. The Arpanoid has an all analog dry signal, all digital wet signal and true or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or bypass switching.
  • Página 2 Les alimentations à switch, les alimentations como con acordes. El Arpanoid genera una escala basada en la señal de entrada de la para pedales o fuentes con salidas múltiples aisladas. Los pedales producirán un mayor true bypass.