Installation And Utilization - Domair COOLCUB Instrucciones De Uso

Description
Filling the tank
REMINDER: UNPLUG THE DEVICE BEFORE FILLING, SERVICING OR
IMPORTANT: When adding water, always make sure that the maximum level is never
exceeded by monitoring the water level window on the tank.
1. Place the device on a flat and stable surface (Fig. 1)
2. Open the small tank hatch and fill it with fresh water using a jug or any other
container with a spout (Fig. 2)
3. Insert the large USB plug into the adapter supplied and the small plug into the
USB socket on the back of the device. Then connect the adapter to a 230V socket
outlet (Fig.3)
NOTE:
•
The large USB socket can be directly connected to any compatible USB
socket, such as that of a computer, for example.
Rev 1_ 16 01 20 Fabriqué en Chine Page 22
1. USB adapter 2. USB cable
3. Ambient colour selection
4. Fan speed selection
5. Air outlet grille 6. Fan speed indicator
7. Start/stop button
9. Water tank
OTHERWISE HANDLING IT
8. Air intake grille