Setting The Audio; Setting The Image Lock - Samsung PS-50P2HTR Manual De Instrucciones

ENG
➣
This function doesn't operate in TTX mode.
Click "Settings" of the main icons and the Settings control screen appears.
Info Grid shows some basic information
necessary to the Settings control.
When each of unction is selected, the set
value of the selected function is displayed on
the screen. When Select All is selected, the
default value returns. If you change this value
in this screen, it switches to CUSTOM in
Picture setting mode automatically.
ΠAudio : Control the audio of all input sources.
´ Treble : Adjusts the treble of the selected
display.
ˇ Bass : Adjusts the bass of the selected
display.
¨ Balance : Adjusts the balance of the selected
display.
Click "Settings" of the main icons and the Settings control screen appears.
Info Grid shows some basic information
necessary to the Settings control.
ΠImage Lock : Controls the image lock of PC
input source.
´ Frequency : Adjusts the frequency of the
selected display.
ˇ Phase : Adjusts the phase of the selected
display.
¨ Position : Adjusts the position of the
selected display.
ˆ Auto Adjustment : Adjusts the picture
automatically.

Setting the Audio

Setting the Image Lock

52
You can only control Displays for which the Power Status is ON. If you
have not selected a setup the value displayed will be the Factory Default
Value.
The Setting control function is available for only the displays are powered On.