Spare Parts - Riester spirotest Instrucciones Para El Uso

Precautions!
• During the test, hold "Spirotest" in horizontal position. (If the unit is not
held steady, the needle cannot rotate uniformly and measured results
will not be correct).
• When using the unit, the small holes at the side of the upper section
must not be covered with your hand.
• The "Spirotest" is a precision instrument similar to a clock, and must be
handled with care.
• Only your doctor is in a position to analyse the values exactly.
5. Cleaning
Cleaning and/or disinfecting
The external surfaces of the spirometer can be cleaned with a moist cloth
and can be disinfected with the following disinfecting agents: aldehyde, (for-
maldehyde, glutaraldehyde, aldehyde separators) or tensides.
All instrument components with the exception of glass components, may be
disinfected with alcohol.
When using any of these substances, the instructions supplied by the
manufacturer must be observed.
Caution!
If the unit is used regularly, water droplets and saliva will
condense on the inside of the housing, impairing precision.
After every 10 measurements remove the lower section and
clean it with a cloth.
Disinfection
According to the ruling teaching (Tübingen Medical Products Test Centre),
sterilisation is only specified for surgery.

6. Spare parts

Item No. 11230
Item No. 11232
7. Maintenance
These instruments and their accessories do not require any specific
maintenance.
Should an instrument have to be examined for any specific reason what-
soever, please return it to the Company or an authorised RIESTER dealer
in your area. Addresses to be supplied on request.
10
Package of 50 pcs. plastic mouthpieces
Package of 1000 pcs. carton mouthpieces