Panacom PA-7272 Manual Del Usuario página 4

All manuals and user guides at all-guides.com
screen will deploy the legend SET 1 DATE, press the UP/DOWN key
in order to select different options. Press SET key again to confirm
your election. Use UP/DOWN key to select the way you might need.
After complete the set-up process, press SET key and skip to the
next item. To exit the menú, press DEL key.
On pressing SET (With earset hung-up), you will be managing the
next functions:
OPERATIONS FUNcTIONS SETTINgS
DATE/TIME
The LCD screen will deploy SET 1 DATE, press SET key to enter this
function. The number for the year will start to blink, use UP/DOWN key
to select the right one, then press SET key to skip next function.
AREA cODE
The LCD screen will deploy SET 2 CODE, Press SET key again to
confirm your election the screen will show the word ACODE, press
the SET key to enter this function. Use UP/DOWN key to select the
value, then press SET key to skip next function.
The area code can be used to filter this code from incoming calls.
For example, if area code = 75 when exists an incoming call with 75
6554556, it will show on the screen only as 655 4556.
PABX cODE (PRIvATE AUTOMATIc BRANch EXchANgE)
The LCD screen will deploy SET 3 PCODE, press SET key to enter
this function. The LCD screen will deploy PCODE, Use UP/DOWN
key to select the value, then press SET key to skip next function.
Cuando PABX code is programmed, for example '0' to '9', the tele-
phone automatically will redial that code and will make a pause of 2
seconds followed by the external number (must be over 5 digits).
AUTO-IP
The LCD screen will deploy SET 4 AUTO IP, press SET key to enter
this function.. The LCD screen will deploy AUTO IP OFF and OFF
will blink, Use UP/DOWN key to select the value, then press SET
key to skip next function. When the LCD screen deploys AUTO IP
Pg. 4