Panacom PA-7272 Manual Del Usuario página 5

All manuals and user guides at all-guides.com
ON, press SET key. Then the LCD screen will deploy INPUT CODE
so you can enter the IP numbers. Use DEL key to correct any wrong
number. Then restore all the IP numbers, press SET key to skip next
item. The outgoing will automatically use the IP mode.
Auto IP function allows you replacing a secuence of numbers with
only a 0 (zero). For example, when you set 1455 as Auto IP, when you
need to dial 1455, just dial 0 at beggining (pre-dial mode), 0 2334565
will be dialed as 1455 2334565.
MODE P/T (PUlSE/TONE)
The LCD screen will deploy SET 5 P-T, press SET key to enter this func-
tion. The LCD screen will deploy TONE. Use UP/DOWN to switch it to
PULSE, presione la tecla SET para desplazarse al siguiente ítem.
ANTI-STEAl
The LCD screen will deploy SET 6 ALAR, press SET key to enter this
function.. The LCD screen will deploy STEAL OFF. Use UP/DOWN to
switch it to ON, press SET key and skip to the next item.
clOcK
The LCD screen will deploy SET 7 ALERT press SET key to enter this
function. The LCD screen will deploy 1 00-00 OFF, which simbolize
three kind of alarms. Press UP/DOWN key to set the desired alarm.
The phone will ring at the set time. Select ON and press SET key to exit.
3. Incoming call Reception:
Whenever you have an incoming call, the unit will automatically deploy
on the screen the number of the caller, date and time, and so the serial
number (within is a call #1 or #2). If the income call is set on private
mode it will visualized as "__p__"; it will visualized as "__0__" if it is
impossible to determine the caller number, it will visualized as "—E—"
if caller signal contains any kind of error.
4. Function Keys Operation:
UP & DOWN Key
Despite of the mode selected, press UP/DOWN key in order to check
all incoming numbers.if there's no one, the unit will show END. The
unit can receive telephone numbers up to 16 dígits.
Pg. 5