Campbell Hausfeld AL2270 Instrucciones De Montaje página 3

Maintenance (Continued)
2. Remove parts from frame and clean separately. Hot, soapy
water is best for cleaning if latex paint was used.
3. With frame still attached to spray gun, place the end of the
frame into an empty bucket to flush residual paint (See fig-
ure 3).
Figure 3
4. Place suction assembly of sprayer into bucket of solvent.
5. Trigger gun until discharge from roller frame is clear.
6. Disconnect frame from gun and let drain.
Insert end
into bucket
3
www.chpower.com