Troubleshooting - Craftsman 151.30381 Manual Del Usuario

PROBLEM
1. Bag full
2. Blocked tube
3. Blocked impeller
Unit will not blow
4. Dirty bag
or suck debris.
5. Torn bag
6. Bag unzipped
7. Unit unplugged
1. Unit is unplugged.
2. Power/speed switch is in the
OFF position.
3. Defective power switch.
Unit will not start.
4. Vac tubes are not correctly
installed.
5. vacuum gate/port is not closed.
6. House circuit may have tripped.

TROUBLESHOOTING

POSSIBLE CAUSE
13 ― English
SOLUTION
1. Empty the bag.
2. Clear the blockage.
3. Clear the blockage
4. Clean the bag.
5. Replace the bag.
6. Zip up the bag.
7. Plug into an outlet or an extension cord.
1. Check cord to make sure it is plugged into an
electrical outlet.
2. Slide switch to high or low.
3. Call toll free helpline: 1-888-331-4569.
4. Check vac tubes to ensure that they are allowing
the switch to be engaged when correctly installed.
5. Ensure that port/cover is fully closed an locked.
6. Check wall circuit breaker panel and reset if
necessary.