Reliable BRIO PRO 1000CC Manual De Instrucciones página 14

Fig. 2
11
Fig. 1
Fig. 3
Fig. 4
1. Turn the trolley upside down in order to
easily screw the rotating back wheels
into the threaded holes (fig. 1).
2. Assemble the wheel in the following
order: washer, chrome back wheel cover,
back wheel, brass wheel cover, chrome
back wheel cover, washer and fix them
with a self-locking nut on the shaft (fig.
2). Screw using the spanner, please be
careful not to close them too tightly.
3. Hold the trolley up and put the steam
cleaner in it. Tilt the machine forward in
order to position the front wheels in their
place. This will allow a correct positioning
of the back wheels also (fig. 3)
*Be sure that the electrical cord support
is not attached to the Brio Pro before
installing onto the trolley.
4. Put the accessory tray on the trolley
base unit and screw the fixing caps (fig.
4).