How To Use Your Steam Cleaner - Reliable BRIO PRO 1000CC Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ACCESSORIES WITH STEAM CLEANER
8.
Rectangular floor brush
9.
Triangular brush with black polyester bristles
10.
Window cleaner with 25 cm squeegee blade
11.
Black upholstery scraper
12.
Funnel
13.
30 mm small brush with black polyester bristles
14.
30 mm small brush with brass bristles
15.
38 mm small brush with black polyester bristles
16.
Extension pipes
17.
Nozzle with brass tip
18.
2,45 m flexible hose
19.
Pad for triangular brush
20.
Drain opener key
21.
Pad for rectangular brush
22.
Towel
23.
35 cm squeegee blade for windows
24.
Aluminum nozzle

HOW TO USE YOUR STEAM CLEANER

1.
Remove the water tank cap (4) and fill the water tank (4) up to the maximum of 3L (10 to
11 cups) of water. Secure the cap until snug.
2.
Connect the electrical cord to the main power outlet.
3.
Plug the flexible steam hose to the steamer (7), and slide on appropriate accessories to
the other end of the steam hose.
4.
Turn the main power switch (1) from the "O" position to the "|" position. The switch light
will come on. The steam generator will be supplied water from the water tank via an
electronically controlled pump and the heating of the water begins. It is normal to hear a
buzzing noise from the pump when it is in operation.
When the unit has reached proper pressure, the steam ready light (A) will come on, indicating
that it is now ready for use. The steam ready light (A) will go on and off during use, indicating
the change of pressure in the boiler unit.
Note: When calling for steam at the beginning of each use, you may notice a rapid decrease in
the pressure to the unit. This is normal as the air in the unit is being voided, and should only
last for a short period of time at the beginning of each use.
05

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido