Specifications; Controls And Accessories; Selecting The Steam Generator Output For The Steam Room - Helo HNS-M2 Instalación Y Manual De Uso

User and installation manual HNS–M2

Specifications

Operating voltage
Output options
Enclosure class
Installation
Water tank material
Water tank pipes
Steamer dimensions
Weight when empty
Easy to use
Floor or wall installation
Digital control panel Midi 2 (operating time can be set between 0–23 hours)
On/Off push button (alternative method of control, operating time fixed 30 min)
The installation of the control centre and On/Off push button in the steam room is allowed
Joint use of the control panel and the push button is possible; the temperature and the operation time are set from
the control panel, the push buttoncan function as a remote starter.
Easy maintenance
Changeable resistors (3 pcs), of which 1 is fitted with a heat fuse.
Fill cap for chalk remover (citric acid) has been placed on the upper part of the steam generator.
Components easily replaceable, circuit board, heating elements, surface sensor.

Controls and accessories

Control panel Midi (0043256)
On/Off push button (0043211)
Sensor (0043210)
Scent pump, (Essence kit 0038130)
Scent pump canister 20 l (0038132)
Automatic flush and rinse cycle. (Automatic drain valve 4310130)
Steam nozzles (3.4–6.0 kW 1pc, 7.7–9.5 kW 2 pcs, 12–14 kW 3 pcs) (7819604)
Light adapter (0043214)

Selecting the steam generator output for the steam room

You can estimate the power requirement using the formula below.
3
Volume (m ) x K1 x K2 = Power requirement (kW)
Forced ventilation
No ventilation
Acrylic wall
Light wall: board + tile
Heavy wall: stone, concrete + tile
Very heavy wall: stone, concrete + tile
In heavy built steam rooms, it is recommended to use e.g. electric heating cable for warming the seats,
walls and floors.
Output Light struc-
ture, acrylic,
tempered
glass
kW No A/C
2 – 7 m³
3,4
3 – 8 m³
4,7
4 – 13 m³
6,0
6 – 15 m³
7,7
9 – 17 m³
9,5
12 – 24 m³
12,0
18 – 30 m³
14,0
Table for selecting a steam generator based on the steam room volume and wall materials.
230 V–240 V 1N~/2~,
230 V 3~,
400 V–415 V 3N~
3.4 / 4.7 / 6.0 / 7.7 / 9.5 / 12.0 / 14.0 kW
IP 20
Floor / wall
Aisi 304, stainless steel
Aisi 314, acid-resistant stainless steel
520 x 380 x 160 mm
about 11 kg
K1 = 0.75
K1 = 0.52
K2 = 1.00
K2 = 1.25
K2 = 1.50
K2 = 2.00
Light board
wall + tile
Air condi- No A/C
tioned
2 – 6 m³ 2 – 6 m³
3 – 7 m³ 3 – 7 m³
4 – 9 m³ 4 – 8 m³
6 – 11 m³ 6 – 10 m³
9 – 13 m³ 9 – 14 m³
11 – 18 m³ 11 – 20 m³
14 – 22 m³ 14 – 24 m³
(3.4 kW – 7.7 kW)
(3.4 kW–14 kW)
(3.4 kW–14 kW)
Heavy wall,
concrete,
stone
Air condi- No A/C
tioned
2 – 5 m³ 2 – 5 m³
2 – 6 m³ 2 – 6 m³
3 – 7 m³ 3 – 7 m³
5 – 9 m³ 5 – 9 m³
8 – 13 m³ 7 – 11 m
9 – 16 m³ 9 – 16 m³
12 – 18 m³ 11 – 17 m³
3
Steam
kg / h
Air condi-
tioned
2 – 4 m³
5
2 – 5 m³
6
3 – 6 m³
8
4 – 8 m³
10
6 – 9 m
13
8 – 12 m³
16
10 – 14 m³
19