Care and Cleaning
7
(cont.)
Routine cleaning of the piercing
nozzle: The nozzle is located in
the lid of the coffee maker. Bend a
small paper clip as shown; insert
the tip of the paper clip through
the holes of the piercing nozzle
and up into the piercing nozzle
to ensure grounds have been
removed. Brew 2 or 3 times with
cold water to make sure grounds
have been removed from the
piercing nozzle.
w WARNING
Burn Hazard.
Failure to allow coffee maker to cool down may cause hot water or
coffee to spray from the piercing nozzle. Use caution when cleaning.
w CAUTION
Cut Hazard.
Piercing nozzle is sharp. Use caution when cleaning.
DISHWASHER-SAFE
DO NOT use the "SANI" setting
when washing in the dishwasher.
"SANI" cycle temperatures could
damage your product.
11