Comet DSG-10 EX Instrucciones Para El Uso página 18

EN
MAIN WARNINGS
CAUTION! It is important to be careful of the
following items.
- All the maintenance and adjustment activities
described in this handbook must be carried out
only after stopping the machine (main switch
turned to off) and disconnecting the power
cord, if not clearly indicated that the operation
must be carried out when the machine is on.
- All the adjustment and activities that are not
described in this handbook must be carried out
by qualified and skilled operators to avoid any
accident or damage to the machine and to the
operator.
Carefully read this operating handbook before
use.
It provides important information about a
safe installation, use and maintenance of the
machine.
- The non-compliance with the safety measures
may entail serious injuries to the operator and
damages to the machine.
- Carefully keep this handbook for consultation
purposes up to the machine final dismantling.
The use and maintenance activities must be
carried out correctly; otherwise, the builder
cannot be held responsible for the damages
to people, animals or things deriving from
the non-compliance with the following
instructions.
- Check that both the machine and its
components are undamaged when unpacking
them. Contact your reseller in case of doubts.
- The installation must be carried out by
skilled operators, according to the builder's
instructions. Make sure that the rating
corresponds to the factory power line before
energising the machine. The machine is
electrically safe only when properly grounded.
In case of doubts, contact highly skilled
operators for a thorough inspection.
- De-energise the machine before any cleaning
or maintenance activity.
- Never leave the machine energised if unused.
Turn the main switch off.
- De-energise the machine in case of failure and /
or troubles. Do not tamper with its controls and
equipment. Just contact the authorised after-
sales service points for servicing purposes and
always order original spare parts.
- The draining and loading pipes, the safety
sheaths and the solenoid valves must not
be cut and tampered with. De-energise the
machine in case of damages
- Any use of the machine other than the one it
has been built for represents an anomalous
condition and can cause serious damages to
the operating means and entail a serious risk
for the operator using it.
- Never remove or hide the warning labels
applied to the machine front and side parts.
- The same instructions are valid for various
models; some details may differ according to
the machine model.
09c Inadequate extension cords can be danger-
ous. If an extension cord is used, it must be suit-
able for outdoor use and the plug and socket
must be of watertight construction, or connec-
tions must be dry, away from the ground and a
cable reel must be used so that the socket is at a
distance of at least 60 mm from the ground.
16i This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge.
Children should be supervised to ensure that
17i
they do not play with the appliance.
17c The electric supply connection shall be
made by a qualified electrician and comply
with IEC 60364-1. It is recommended that the
electric supply of this machine should include
either a residual current device that can inter-
rupt the supply if the leakage current to earth
exceeds 30 mA for 30 ms or a device which can
test the earth circuit..
04i This appliance has been designed for use with
the detergent provided or the detergent speci-
fied by the manufacturer, such as a neutral sham-
poo based on biodegradable anionic surface ac-
tive detergents. The use of other detergents or
chemicals may put the appliance's safety at risk.
23i Do not direct the jet against yourself or others
in order to clean clothes or foot-wear.
18