1)
Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD monitor and
the AUDIO OUT jacks on the DVD player.
2)
Connect a Component cable between the BNC/COMPONENT IN - P
the P
, Y, P
jacks on the DVD player.
R
B
3)
Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD
monitor or on the remote control.
4)
Then, start the DVD Player with a DVD disc inserted.
Note
• A component cable is optional.
For an explanation of Component video, consult your DVD manual.
Connecting to a Camcorder
1)
Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the
camcorder.
Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN
[L-AUDIO-R] on the LCD monitor.
2)
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the
LCD monitor.
3)
Select AV for the Camcorder connection using the SOURCE button on the front of the LCD monitor or on
the remote control.
4)
Then, start the Camcorders with a tape inserted.
Note
• The audio-video cables shown here are usually included with a Camcorder.
port on the LCD monitor and
, Y, P
R
B