Avidsen 123287 Manual De Instrucciones página 31

OUTDOOR 720P WIFI IP CAMERA
The app will the request the password for logging in
to the WiFi network in order to send this information
to your camera:
After entering the password for the WiFi network that
the camera should be using, click on "Réglages"
(Settings): your tablet or smartphone is asking
if the camera is accessible and if it is ready to be
configured.
If your camera is nearby and not configured, click on
Oui (Yes) to begin configuration using the app.
Note: the camera will take 30 seconds to load up
after being switched on.
Once the WiFi connection information has been sent
to the camera by the app, the camera will connect
D - CONFIGURATION
to the network using WiFi.
Your smartphone or tablet will then display the
cameras detected on the network:
Click on the row corresponding to your camera.
Finally, click on "Terminé" (Done) on the upper right-
hand side of the screen, to add the camera to the list
of cameras recognized by the app.
Your camera will appear in the list and you access to
its video and settings.
EN
11