USER'S MANUAL
Product information
A: Main panel
B: Display
C: iPod holder with dock connector
D: USB connection
1
Connect power adapter to wall socket and to power input of product.
2
Press "On/Off" on main panel or remote control.
Play / Recharge iPod with dock connector
3
Press retractable holder.
4
Select correct bracket and place into holder.
Place iPod into bracket.
5
Play mode is set to "iPod" by default.
iPod will also charge if Station is off.
Use Up/Down, Next/Previous, Play/Pause, Enter and Menu buttons to navigate and to select iPod
functions.
6
iPod wheel and buttons can still be used, but volume must be controlled by main panel or remote
control.
Synchronize iPod
Connect USB cable to Station and to computer.
7
Computer may find new hardware. Wait until iPod is completely installed.
Use iTunes software to synchronize.
8
Help, support and free download at www.apple.com/itunes
iPod can still be synchronized if Station is off.
Use FM / AM Radio
Press "FM" or "AM" on remote control, or press "Mode" on main panel 1x (FM) or 2x (AM).
9
"Mode" on main panel will change play mode in following circular sequence:
iPod → FM → AM → Aux
Automatic tuning up/down (search will stop when radio station is found):
- Remote control: Press and hold for 2 seconds "Tune +/-", OR
- Main panel: Press 1x "volume +/-".
Manual tuning (fine tuning or search for specific frequency):
10
- Remote control: Press 1x "Tune +/-" to change frequency. Repeat if necessary.
Manual tuning function is not available on main panel.
Set radio volume on main panel: Press and hold for 2 seconds "volume +/-".
E: Aux in
F: Video out
G: Power in
H: Radio antenna
I : Brackets
1
UK