Declaration Of Conformity - Beta 1843 15-H05 Manual De Instrucciones

EN
INSTRUCTIONS FOR USE
MAINTENANCE
Repair and calibration jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s
repair centre.
DISPOSAL
The hose reel must be disposed of in accordance with the law provisions in force in the country where it is used.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment or
human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will give way to the
application of such fines as provided for under current regulations.
WARRANTY
This equipment is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month warranty for
professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects, by fixing the defective pieces or replacing them at
our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls.
In addition, this warranty will no longer be valid if any changes are made, or if the pneumatic tool is forced or sent to the customer
service in pieces.
This warranty explicitly excludes any damage caused to people and/or things, whether direct or consequential.


DECLARATION OF CONFORMITY

We hereby declare, assuming full responsibility, that the described product complies with all the following standard:
• Electromagnetic Compatibility (E.M.C.) 2014/30/UE;
• Low Voltage Directive (L.V.D) 2014/35/UE;
• Directive 2011/65/EU on the restriction of the use of certain hazardous Substances - Ro.H.S. 2011/65/UE;
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB)
ITALY
Date 04/10/2021
15