Maintenance & Storage - Kokido Telsa 80 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Clean out all debris from the base, suction nozzle flap, and draining filter plate.
Use clean water to rinse the entire base. To detach the filter plate, pry the rib of the
plate. If the draining filter plate is damaged, replace it with a new one before the
next operation.
Note: Do not remove the draining filter plate. Without it, debris will escape from the
base's debris compartment during operation.
5. Reverse the steps to install the filter and cover onto the base. Make sure the flange
of the transparent cover is under the arch.
MAINTENANCE & STORAGE
NOTE:
1. Battery discharges on its own during storage. Make sure to fully-charge the pool
vacuum before storage.
2. You must re-charge the battery at least once every three months when it is not in
use.
Unplug the external adaptor from the socket and then unplug the adapter jack from
the charging base.
13

Publicidad

Tabla de contenido
loading

Productos relacionados para Kokido Telsa 80

Este manual también es adecuado para:

Yzaki 80Ev81

Tabla de contenido