Publicidad
Testing
INSTRUCTIONS FOR AUTOMATIC TEST OPTION
1. Once the unit is powered up, It will automatically initiate a self test and diagnostics as follows:
At every times: Checking for battery disconnection, charger board fault, lamp failure and
transfer failure.
Every month: performing a 3 minutes functional test.
Every year: performing a 1 hour or 3 hours duration test.
All test functions are factory preset and do not need field adjustment.
2. Button test
Press test button once
Press test button twice within 2 seconds
Press test button 3 times within 2 seconds
Press test button 4 times within 2 seconds
Note: After repairing a service fault, press and hold the test button for 2 seconds to test the
flashing indicator light to green.
MANUAL TESTING
1. LED Indicator Meaning
• Green On: Normal Status
• Green Off: Emergency Status / circuit fault / battery disconnected
2. Button test
• Hold the test button for functional test.
• Release the test button for stopping functional test.
30 seconds duration test
3 minutes duration test
30 minutes functional test
1 or 3 hours duration test
Publicidad
