Steren AUD-770 Manual De Instrucciones página 19

Switch the headset on or off
To switch on, press the answer/end key for about 1 second. To switch
off, press and hold the answer/end key for about 5 seconds.
Pair the headset with a compatible phone
Make sure that the headset is on, and put it in pairing mode by
pressing the answer/end key and the volume up (+) key at the
same time over 5 seconds until the blue indicator light lights up. The
indicator light remains on for 5 minutes, during which you can pair the
headset with a compatible mobile phone.
1. Set the phone to search for Bluetooth devices. See the user guide
of your phone for instructions.
2. When your phone finds the headset, confirm the pairing from your
phone.
3. When prompted for the Bluetooth passcode of the headset, enter
0000.
If the pairing was unsuccessful, try to pair the devices again.
You only need to pair the headset with your phone once.
If the pairing was successful, the blue indicator light starts to flash.
The headset is now in the standby mode and ready for use.
6