Bastuck L99AH Instrucciones De Montaje página 5

FITTING INSTRUCTION
| 18.06.2021 |
L99AH
Anti-roll bar kit for Austin Healey 100/4 + 3000 BN1 - BJ6
4. Adjusting the anti-roll bar
1. The hardness of the anti-roll bar is determined by the choice of the lower attachment point of the anti-roll bar
link.
--> the further back, the softer!
soft
2. The preload of the anti-roll bar can be varied by turning the anti-roll bar joint. To do this, loosen the two
1
lock nuts and turn the middle adjusting screw.
*) ATTENTION: The sides are always viewed in the direction of travel!
medium hard
BASTUCK & Co GmbH Tel.: +49 (0) 68 81 - 9 24 91 01
D-66822 Lebach Fax: +49 (0) 68 81 - 9 24 91 19
2
1
2
1
- 5 -
service@bastuck.de
www.bastuck.com