Troubleshooting; Display Of The Faults; Checking The Memory Version Of The Remote Control - De Dietrich CDI4 Instrucciones De Instalación, Utilización Y Mantenimiento

AD254 - AD285
4

Troubleshooting

4.1

Display of the faults

4.2

Checking the memory version of the remote control

+
MODE
1 2 3 4 5 6
%
0 2 4 6 8 10 12 14 16 18 20
$
MODE
C002543-B
27/06/2012 - 300020537-001-02
If there is a malfunction, the remote control displays the message
Error.
The boiler control panel will indicate the corresponding error message.
¼ To consult the cause of error messages, refer to the boiler's
installation and maintenance instructions (Chapter: Troubleshooting).
Before contacting the installer, make a note of the memory version
installed in the remote control. Proceed as follows:
1. Press the MODE and r keys simultaneously for 5 seconds.
5"
A000857-A
2. The 1 menu is displayed. Press the rotary button 2 times to display
the menu 3. The memory version is shown to the right of the display.
7
22 24
3. To return to the principal display, press the MODE key or wait 20
seconds.
To go back to the previous display, press the key r.
4. Troubleshooting
EN
41