JVC CU-V803 Manual De Instrucciones

CU-V803 KIT
Dear Customer,
Thank you for purchasing the JVC color CCD camera kit. Before use, please read the safety information and precautions to ensure safe use of your new color CCD camera kit.
This unit is for consumer use only and cannot be used as a professional product.
Check all the contents shown below.
Color CCD
Camera
(with built-in
condenser
microphone)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
This unit should be used with AC 120V`
the USA and Canada.
CAUTION:
To prevent electric shocks and fire hazards, do NOT use
any other power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
When using the color CCD camera kit, basic precautions should always be followed including following.
WARNING/ To reduce the risk of fire, electric shock, or injury, read all instructions carefully before using the color CCD camera kit.
If you drop the camera kit or it is damaged, disconnect
the AC adapter immediately.
•Refer servicing to the nearest JVC dealer.
•Do NOT continue using the camera kit if it is damaged;
otherwise, this can result in a risk of fire or electric shock.
•NEVER attempt to repair the camera kit by yourself,
otherwise serious/fatal injury may result.
If water or foreign objects enter the camera kit,
disconnect the AC adapter immediately.
•Refer servicing to the nearest JVC dealer.
•Do NOT continue using the camera kit if it is damaged;
otherwise, this can result in a risk of fire or electric shock.
•NEVER attempt to repair the camera kit by yourself,
otherwise serious/fatal injury may result.
NEVER use any voltage other than that specified.
•Using the wrong voltage can result in a risk of fire or
electric shock.
Do NOT disassemble or modify the camera unit.
•This can result in a risk of fire or electric shock.
•NEVER attempt to overhaul/fix/repair the camera kit by
yourself, otherwise serious/fatal injury may result.
•When you need to have the camera kit overhauled/fixed/
repaired, always refer servicing to the nearest JVC dealer.
Cable Unit A
SAFETY PRECAUTIONS
CAUTIONS:
To prevent shock, do not open the cabinet. No user
serviceable parts inside. Refer servicing to qualified
personnel.
When you are not using the AC Power Adapter for a
long period of time, it is recommended that you
disconnect the power cord from AC outlet.
NOTES:
The rating plate of the color CCD camera is on its
back.
The rating plate of the AC Power Adapter is on its
front.
The rating plate of the Cable Unit (A/B) is on its
bottom.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
` ` , 60Hz only in
` `
CAUTIONS (for AC Power Adapter) :
If used near a radio, this unit may interfere with
reception.
Prevent inflammables, water and metallic objects from
entering the unit.
Do not disassemble or modify the unit.
Do not apply shocks to the unit.
Do not subject the unit to direct sunlight.
Avoid using the unit in extremely hot or humid places.
Avoid using the unit in places subject to vibrations.
IMPORTANT SAFETY INSTRUCTIONS
PRECAUTIONS FOR SAFETY
Do NOT direct the lens of the camera at the sun or
extremely bright objects.
•If you allow powerful light to directly enter the lens of the
camera, the internal circuitry may be damaged from
excessive heat due to light concentration on the lens,
which can result in a risk of fire or camera malfunction.
Keep the camera kit free from water and moisture.
•Allowing the camera kit to become wet can result in a
risk of fire or electric shock.
Do NOT use the camera kit . . .
.... in places subject to excessive humidity or dust.
.... in places exposed to oil vapor or steam (e.g. near a
humidifier or cooking stove).
.... near a heater or other heat source.
.... in places subject to extremely high temperatures.
.... in direct sunlight.
Do NOT use any accessories other than those specified.
•Using different types of accessories may cause fire,
electric shock or damage to the camera kit.
•Make sure accessories are specifically for this camera kit
before using them. Refer also to their instruction
manuals.
COLOR CCD CAMERA KIT
INSTRUCTIONS
Cable Unit B
AC Adapter
Wiring Cable
( 20 m / 65 ft )
INFORMATION
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
Change or modifications not approved by the party
responsible for compliance could void the user's
authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
This color CCD camera is designed to be used with
NTSC-type color television signals. It cannot be used
with a television of a different standard.
Ensure cables are arranged properly.
•Tripping on cables (such as the AC adapter cord,
connection cables, etc.) will cause the camera kit to fall,
resulting in injury and damage.
•Take care to ensure proper connection/arrangement of
cables.
When you are not using the camera kit for a long period
of time, disconnect the AC adapter.
•As there is high voltage inside the camera kit when the
AC adapter is connected, it is recommended to
disconnect the AC adapter for safety.
Be sure to disconnect the AC adapter and all other
connection cables during transport.
•Carrying the camera kit with cables connected can
damage the cables, resulting in a risk of fire or electric
shock.
Be sure to disconnect the AC adapter when cleaning the
camera kit.
•As there is high voltage inside the camera kit when the
AC adapter is connected, this can result in a risk of
electric shock.
ENGLISH
Wood
Screws
( x 8 )
LYT0403-001A