Signal Led - LD Systems LD MAUI28SE Manual De Usuario

REAR VIEW:
7

SIGNAL LED

Lights up when an audio signal is present at the line input.
8 LIMIT LED
Lights up if the subwoofer is operating in the clipping range. Brief flashing is not a cause for concern, since
the internal audio limiter compensates for over-modulation. Permanent illumination should be avoided by
reducing the input level.
9 PROTECT LED
Lights up when one of the power amplifier protection circuits is active. To protect the power amplifier and
the speaker, the speaker is deactivated in protect mode. Once the source of the trouble has been eliminated
(e.g., overloading), after a short time, the power amplifier returns to normal status, the Protect LED goes out,
and the speaker is reactivated.
8