Hoffman nvent Instrucciones Para El Reemplazo página 4

4. Using a 9/16 wrench or socket, remove the 3/8 lock nut and washer. Remove the offset arm from over the collar stud and
carefully move it aside.
**Do Not
Loosen**
3/8 Lock Nut
and Washer
Collar Stud
5. Using a 7/16 wrench or socket, remove the four 5/16 nuts and washers holding the interlock assembly in place.
Remove the assembly.
NOTE: Grip the two nylon rollers to keep them from falling off the lower pin when the assembly is removed from
the centerpost.
- 4 - © 2018 Hoffman Enclosures Inc.
Offset Arm
Assembly
Interlock
Assembly
Fasteners
PH 763 422 2211 • nVent.com/HOFFMAN
Nylon
Roller
87929373