Hoffman nvent Instrucciones Para El Reemplazo página 8

11. Remove the door latch assembly and move it aside to the right.
Note: **DO NOT DISASSEMBLE THE LATCH RODS!**
Door Cam
Assembly
L50 Handle
Screws
12. Remove the spacer noting the orientation and set it aside.
13. Using a 3/8 wrench or socket, remove the two L50 handle screws and place them aside.
NOTE: **Hold onto the handle as you remove the L50 handle screws!**
14. Remove the existing door cam assembly.
15. Install the new door cam assembly.
16. Reinstall the two L50 handle screws with star washers.
17. Reinstall the spacer oriented as noted in step 12.
18. Reinstall the door latch assembly, washer, and nut.
19. Torque such that the lock nut feature engages but does not prevent the L50 handle from rotating.
- 8 - © 2018 Hoffman Enclosures Inc. PH 763 422 2211 • nVent.com/HOFFMAN
Latch Rod
Spacer (keep
orientation the same
when reinstalling)
Door Latch
Assembly
87929373