Publicidad
Enlaces rápidos
PREPARE OPENING CAREFULLY: MAKE SURE CORNERS ARE SQUARE, HEADER IS LEVEL AND JAMBS ARE STRAIGHT.
PREPARE LA ABERTURA CON CUIDADO: ASEGÚRESE QUE LAS ESQUINAS ESTÉN EN ESCUDRA, QUE LA CABECERA ESTÉ NIVELADA, Y
QUE LAS JAMBAS ESTÉN RECTAS.
PREPAREZ L'OUVERTURE AVEC PRECAUTION : ASSUREZ VOUS QUE LES COIN SONT A ANGLE DROIT, QUE LE LINTEAU EST A NIVEAU
ET QUE LES MONTANTS SONT DROITS.
111
101
L.E. JOHNSON PRODUCTS INC. 2100 STERLING AVENUE, ELKHART, IN 46516 USA
IN111BYP
tel. +1 (574) 293-5664 | info@johnsonhardware.com | http://www.johnsonhardware.com
SLIDING DOOR
INSTALLATION INSTRUCTIONS
1155
1025
1712
2155
30
2 DOOR, PUERTAS, PORTES
3 DOOR, PUERTAS, PORTES
4 DOOR, PUERTAS, PORTES
111SD SERIES
FOR ¾" [19mm], 1-3/8" [35mm], 1-3/4"
[44mm] or 2-1/4" DOORS WEIGHING UP
TO 150LBS. [68kg.] EACH
2 x DOOR WIDTH -1"
2 x ANCHO DE LA PUERTA – 25mm
2 x LARGEUR DE PORTE – 25mm
3 x DOOR WIDTH -2"
3 x ANCHO DE LA PUERTA – 50mm
3 x LARGEUR DE PORTE – 50mm
4 x DOOR WIDTH -2"
4 x ANCHO DE LA PUERTA – 50mm
4 x LARGEUR DE PORTE – 50mm
Page 1 of 4
Publicidad
Manuales relacionados para Johnson Hardware 111SD Serie
Resumen de contenidos para Johnson Hardware 111SD Serie
- Página 1 SLIDING DOOR 111SD SERIES FOR ¾” [19mm], 1-3/8” [35mm], 1-3/4” [44mm] or 2-1/4” DOORS WEIGHING UP INSTALLATION INSTRUCTIONS TO 150LBS. [68kg.] EACH PREPARE OPENING CAREFULLY: MAKE SURE CORNERS ARE SQUARE, HEADER IS LEVEL AND JAMBS ARE STRAIGHT. PREPARE LA ABERTURA CON CUIDADO: ASEGÚRESE QUE LAS ESQUINAS ESTÉN EN ESCUDRA, QUE LA CABECERA ESTÉ NIVELADA, Y QUE LAS JAMBAS ESTÉN RECTAS.
- Página 2 SLIDING DOOR 111SD SERIES FOR ¾” [19mm], 1-3/8” [35mm], 1-3/4” [44mm] or 2-1/4” DOORS WEIGHING UP INSTALLATION INSTRUCTIONS TO 150LBS. [68kg.] EACH MOUNT TRACK TO HEADER: Cut track to fit opening. Insert 1025 Hangers and 1155 Track Stop (3 and 4 door openings only) into track and mount to header with 1-1/4”...
- Página 3 SLIDING DOOR 111SD SERIES FOR ¾” [19mm], 1-3/8” [35mm], 1-3/4” [44mm] or 2-1/4” DOORS WEIGHING UP INSTALLATION INSTRUCTIONS TO 150LBS. [68kg.] EACH HANG DOORS: On front leg of first track first. Slide pivot pins of hanger into sockets and lock into place with clip. Check for smooth travel. Repeat with rear door. CUELGUE LAS PUERTAS : en la pata delantera de la guía primero.
- Página 4 SLIDING DOOR 111SD SERIES FOR ¾” [19mm], 1-3/8” [35mm], 1-3/4” [44mm] or 2-1/4” DOORS WEIGHING UP INSTALLATION INSTRUCTIONS TO 150LBS. [68kg.] EACH 3 AND 4 DOOR 1155 STOP: (3 door opening) Attach the 1155 Stop on the rear track to the right of the center door, (4 door openings) Attach the 1155 Stops to the rear track in the center of the opening.