Johnson Hardware 100SD Serie Instrucciones De Instalación

Descargar este manual

PREPARE OPENING CAREFULLY: MAKE SURE CORNERS ARE SQUARE, HEADER IS LEVEL AND JAMBS ARE STRAIGHT.

PREPARE LA ABERTURA CON CUIDADO: ASEGÚRESE QUE LAS ESQUINAS ESTÉN EN ESCUDRA, QUE LA CABECERA ESTÉ NIVELADA, Y

QUE LAS JAMBAS ESTÉN RECTAS.

PREPAREZ L'OUVERTURE AVEC PRECAUTION : ASSUREZ VOUS QUE LES COIN SONT A ANGLE DROIT, QUE LE LINTEAU EST A NIVEAU

ET QUE LES MONTANTS SONT DROITS.

100

101

L.E. JOHNSON PRODUCTS INC. 2100 STERLING AVENUE, ELKHART, IN 46516 USA

IN100BYP

tel. +1 (574) 293-5664 | info@johnsonhardware.com | http://www.johnsonhardware.com

SLIDING DOOR

INSTALLATION INSTRUCTIONS

1155

1125

2155

1712

2 DOOR, PUERTAS, PORTES

3 DOOR, PUERTAS, PORTES

4 DOOR, PUERTAS, PORTES

100SD SERIES

FOR 1-3/8" [35mm], 1-3/4" [44mm] or

2-1/4" DOORS WEIGHING UP TO

200LBS. [91kg.] EACH

2 x DOOR WIDTH -1"

2 x ANCHO DE LA PUERTA – 25mm

2 x LARGEUR DE PORTE – 25mm

3 x DOOR WIDTH -2"

3 x ANCHO DE LA PUERTA – 50mm

3 x LARGEUR DE PORTE – 50mm

4 x DOOR WIDTH -2"

4 x ANCHO DE LA PUERTA – 50mm

4 x LARGEUR DE PORTE – 50mm

Page 1 of 4

Página 1 SLIDING DOOR 100SD SERIES FOR 1-3/8” [35mm], 1-3/4” [44mm] or 2-1/4” DOORS WEIGHING UP TO INSTALLATION INSTRUCTIONS 200LBS. [91kg.] EACH PREPARE OPENING CAREFULLY: MAKE SURE CORNERS ARE SQUARE, HEADER IS LEVEL AND JAMBS ARE STRAIGHT. PREPARE LA ABERTURA CON CUIDADO: ASEGÚRESE QUE LAS ESQUINAS ESTÉN EN ESCUDRA, QUE LA CABECERA ESTÉ NIVELADA, Y QUE LAS JAMBAS ESTÉN RECTAS.
Página 2 SLIDING DOOR 100SD SERIES FOR 1-3/8” [35mm], 1-3/4” [44mm] or 2-1/4” DOORS WEIGHING UP TO INSTALLATION INSTRUCTIONS 200LBS. [91kg.] EACH MOUNT TRACK TO HEADER: Cut track to fit opening. Insert 1125 Hangers and 1155 Track Stop (3 and 4 door openings only) into track and mount to header with 1-1/4”...
Página 3 SLIDING DOOR 100SD SERIES FOR 1-3/8” [35mm], 1-3/4” [44mm] or 2-1/4” DOORS WEIGHING UP TO INSTALLATION INSTRUCTIONS 200LBS. [91kg.] EACH HANG DOORS: On front leg of first track first. Slide pivot pins of hanger into sockets and lock into place with clip. Check for smooth travel. Repeat with rear door. CUELGUE LAS PUERTAS : en la pata delantera de la guía primero.
Página 4 SLIDING DOOR 100SD SERIES FOR 1-3/8” [35mm], 1-3/4” [44mm] or 2-1/4” DOORS WEIGHING UP TO INSTALLATION INSTRUCTIONS 200LBS. [91kg.] EACH 3 AND 4 DOOR 1155 STOP: (3 door opening) Attach the 1155 Stop on the rear track to the right of the center door, (4 door openings) Attach the 1155 Stops to the rear track in the center of the opening.