Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the switch using the 19-inch rack-mount kit
1.
Ensure the rack has sufficient space for the switch and its cables.
2.
If necessary, install cage nuts at the front and rear of the rack.
3.
Unpack the switch and remove the rubber feet.
4.
Screw the front brackets to the sides of the switch using the M4 screws
that are supplied (see figure below).
5.
Measure the depth of the rack to determine the correct position to attach
the rear brackets to the switch.
6.
Screw the right rear and left rear brackets to the sides of the switch using
the M4 screws that are supplied.
7.
Mount the switch into the rack from the front, and attach it to the rack
using rack mounting screws.
Two people may be required to safely support the switch until the brackets
are screwed to the rack.
Installation and Safety Guide
RMOUNT3a
7
Publicidad
Tabla de contenido
