Manuales relacionados para Allied Telesyn AT-8216FXL/MT
Resumen de contenidos para Allied Telesyn AT-8216FXL/MT
- Página 1 AT-8216FXL/MT AT-8216FXL/VF AT-8216FXL/SC AT-8224XL AT-8288XL/MT AT-8288XL/SC Fast Ethernet Switches Quick Install Guide PN 613-10810-00 Rev C...
- Página 2 Allied Telesyn International, Corp. has been advised of, known, or should have known, the possibility...
-
Página 3: Electrical Safety And Emission Compliance Statement
Electrical Safety and Emission Compliance Statement Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Página 5: Tabla De Contenido
Table of Contents Electrical Safety and Emission Compliance Statement ......iii Welcome to Allied Telesyn ................. vii Where to Find Web-based Guides ..............vii Document Conventions ................... viii Contacting Allied Telesyn ................viii Online Support ..................viii Telephone and Fax Support..............viii E-mail Support ................... -
Página 7: Welcome To Allied Telesyn
All web-based documents relating to this product and other Allied Telesyn products can be downloaded from the web site in pdf format. There are several other manuals that you will need in addition to this guide in order to install and manage your new switch. -
Página 8: Document Conventions
A warning indicates that performing or omitting a specific action may result in bodily injury. Contacting Allied Telesyn There are several ways to contact Allied Telesyn technical support: online, telephone, fax and e-mail. Online Support You can request technical support online by filling out the Online Technical Support Form at www.alliedtelesyn.com/forms/support.htm. -
Página 9: E-Mail Support
Authorization (RMA) number. A product sent to Allied Telesyn without a RMA number will be returned to the sender at the sender’s expense. To obtain an RMA number, contact Allied Telesyn’s Technical Support at one of the following locations: North America... -
Página 10: Ftp Server
Tell Us What You Think If you have any comments or suggestions on how we might improve this or other Allied Telesyn documents, please fill out the “AT-8216FXL, AT-8224XL, and AT-8288XL Quick Install Guide Feedback” on page 27 and return the form to us at the address or fax number provided. -
Página 11: At-8216Fxl, At-8224Xl, And At-8288Xl Series Fast Ethernet Switches
The switch models are listed in Table 1. Table 1 AT-8216FXL, AT-8224XL, and AT-8288XL Series Fast Ethernet Switches Number Type of Models Type of Port Maximum Distance of Ports Connector AT-8216FXL/MT 100Base-FX MT-RJ 2 km (1.25 mi) AT-8216FXL/VF 100Base-FX VF-45 2 km (1.25 mi) AT-8216FXL/SC 100Base-FX 2 km (1.25 mi) -
Página 12: Installing The Switch
For information on site requirements, cabling specifications, and network topologies, refer to the AT-8216FXL/MT, AT-8216FXL/VF, AT-8216FXL/SC, AT-8224XL AT-8288XL/MT, and AT-8288XL/SC Installation Guide. This guide is available on the Allied Telesyn web site at www.alliedtelesyn/support/prd_libs.htm. Verifying the Package Contents Make sure the following components are included in the switch package. If any of these items are missing or damaged, contact your sales representative. -
Página 13: Reviewing Safety Guidelines
AT-8216FXL, AT-8224XL, and AT-8288XL Series Quick Install Guide Reviewing Safety Guidelines Please review the following safety guidelines before you begin to install the Fast Ethernet switch. Laser Class 1 laser product. ! 6 Laser Do not stare into the laser beam. ! 7 Warning Electric Shock Hazard: To prevent electric shock, do not remove the cover. -
Página 14: Installing The Switch On A Table
If you purchased an expansion module for the switch, install the module by following the instructions included with the module or by referring to the AT-8216FXL/MT, AT-8216FXL/VF, AT-8216FXL/SC, AT-8224XL, AT-8288XL/MT, and AT-8288XL/SC Installation Guide. Apply AC power to the switch by plugging the power cord into the AC power connector on the back panel of the unit (shown in Figure 1) and plugging the other end into a wall outlet. - Página 15 AT-8216FXL, AT-8224XL, and AT-8288XL Series Quick Install Guide As power is applied to the switch, the Fault LED (shown in Figure 2) flashes as the switch runs a series of internal self tests. After the switch has finished running its self tests, the Fault LED will stop flashing and will remain off.
-
Página 16: Installing The Switch In A Rack
If you purchased an expansion module for the switch, install the module by following the instructions included with the module or by referring to the AT-8216FXL/MT, AT-8216FXL/VF, AT-8216FXL/SC, AT-8224XL, AT-8288XL/MT, and AT-8288XL/SC Installation Guide. Remove the snap-on plastic feet from the bottom of the switch, as shown in Figure 3. - Página 17 AT-8216FXL, AT-8224XL, and AT-8288XL Series Quick Install Guide Mount the switch in the rack using standard screws (not provided). Caution Air vents must not be blocked and must have free access to the room ambient air for cooling. ! 13 Apply AC power to the switch by plugging the power cord into the AC power connector on the back panel of the unit (shown in Figure 1) and plugging the other end into a power outlet.
-
Página 18: Setting Up For Local Management
The switch displays the Omega main menu. You are now ready to use the Omega management interface to configure the switch. For instructions, refer to the AT-S24 Management Software User’s Guide. This guide is available on the Allied Telesyn web site at www.alliedtelesyn/support/prd_libs.htm. -
Página 19: Switch Leds
The port is operating at full-duplex. Collision) Solid Amber The port is operating at half-duplex. Flashing Collisions are occuring on the line. Amber For information on troubleshooting the switch, refer to the AT-8216FXL/MT, AT-8216FXL/VF, AT-8216FXL/SC, AT-8224XL, AT-8288XL/MT, and AT-8288XL/SC Installation Guide. -
Página 20: At-S24 Software Default Setting
AT-S24 Software Default Setting Table 4 lists the default settings for the AT-S24 software that comes pre- installed on the Fast Ethernet switch. Table 4 Fast Ethernet Switch Default Settings Settings Default IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Gateway Address 0.0.0.0 Get Community String public... -
Página 21: Warranty Registration
AT-8216FXL, AT-8224XL, and AT-8288XL Series Quick Install Guide Warranty Registration When you have finished installing the switch, you should register your product by completing the enclosed warranty card and sending it in, or by visiting our web site at www.alliedtelesyn.com/forms/warranty.htm and completing the on-line registration form. -
Página 23: Appendix A
Appendix A Translated Electrical Safety Emission Information Important: This appendix contains multiple-language translations for the safety statements in this guide. Wichtig: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. Vigtigt: Dette tillæg indeholder oversættelser i flere sprog af sikkerhedsadvarslerne i denne håndbog. - Página 24 Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- Página 25 AT-8216FXL, AT-8224XL, and AT-8288XL Series Quick Install Guide ! 13 CAUTION: Air vents must not be blocked and must have free access to the room ambient air for cooling. ! 14 OPERATING TEMPERATURE: This product is designed for a maximum ambient temperature of 40°...
- Página 26 Standarder: Dette produkt tilfredsstiller de følgende standarder. Radiofrekvens forstyrrelsesemission EN55022 Klasse A ADVARSEL: I et hjemligt miljø kunne dette produkt forårsage radio forstyrrelse. Bliver det tilfældet, påkræves brugeren muligvis at tage tilstrækkelige foranstaltninger. Immunitet EN50082-1 1997 Elektrisk sikkerhed EN60950, UL1950, CSA 950 Laser EN60825 SIKKERHED...
- Página 27 AT-8216FXL, AT-8224XL, and AT-8288XL Series Quick Install Guide Eisen: Dit product voldoet aan de volgende eisen. RFI Emissie EN55022 Klasse A WAARSCHUWING: Binnenshuis kan dit product radiostoring veroorzaken, in welk geval de gebruiker verplicht kan worden om gepaste maatregelen te nemen. Immuniteit EN50082-1 1997 Electrische Veiligheid...
- Página 28 Normes: ce produit est conforme aux normes de suivantes: Emission d’interférences radioélectriques EN55022 Classe A MISE EN GARDE: dans un environnement domestique, ce produit peut provoquer des interférences radioélectriques. Auquel cas, l’utilisateur devra prendre les mesures adéquates. Immunité EN50082 - 1 Sécurité...
- Página 29 AT-8216FXL, AT-8224XL, and AT-8288XL Series Quick Install Guide Standardit: Tämä tuote on seuraavien standardien mukainen. Radioaaltojen häirintä EN55022 Luokka A VAROITUS: Kotiolosuhteissa tämä laite voi aiheuttaa radioaaltojen häiröitä, missä tapauksessa laitteen käyttäjän on mahdollisesti ryhdyttävä tarpeellisiin toimenpiteisiin. Kestävyys EN50082-1 1997 Sähköturvallisuus EN60950, UL1950, CSA 950 Laser...
- Página 30 Standard: Questo prodotto è conforme ai seguenti standard. Emissione RFI (interferenza di radiofrequenza) EN55022 Classe A AVVERTENZA: in ambiente domestico questo prodotto potrebbe causare radio interferenza. In questo caso potrebbe richiedersi all’utente di prendere gli adeguati provvedimenti. Immunità EN50082-1 1997 Sicurezza elettrica EN60950, UL1950, CSA 950 Laser...
- Página 31 AT-8216FXL, AT-8224XL, and AT-8288XL Series Quick Install Guide Sikkerhetsnormer: Dette produktet tilfredsstiller følgende sikkerhetsnormer. RFI stråling EN55022 Klasse A ADVARSEL: Hvis dette produktet benyttes til privat bruk, kan produktet forårsake radioforstyrrelse. Hvis dette skjer, må brukeren ta de nødvendige forholdsregler. Immunitet EN50082-1 1997 Elektrisk sikkerhet...
- Página 32 Padrões: Este produto atende aos seguintes padrões. Emissão de interferência de radiofrequência EN55022 Classe A AVISO: Num ambiente doméstico este produto pode causar interferência na radiorrecepção e, neste caso, pode ser necessário que o utente tome as medidas adequadas. Imunidade EN50082-1 1997 Segurança Eléctrica EN60950, UL1950, CSA 950...
- Página 33 AT-8216FXL, AT-8224XL, and AT-8288XL Series Quick Install Guide Estándares: Este producto cumple con los siguientes estándares. Emisión RFI EN55022 Clase A ADVERTENCIA: en un entorno doméstico, este producto puede causar radiointerferencias, en cuyo caso, puede requerirse del usuario que tome las medidas que sean convenientes al respecto.
- Página 34 Standarder: Denna produkt uppfyller följande standarder. Radiostörning EN55022 Klass A VARNING: Denna produkt kan ge upphov till radiostörningar i hemmet, vilket kan tvinga användaren till att vidtaga erforderliga åtgärder. Immunitet EN50082-1 1997 Elsäkerhet EN60950, UL1950, CSA 950 Laser EN60825 SÄKERHET VARNING! Laserprodukt av klass 1.
-
Página 35: Appendix B
_______________________________________________________________ Detailed description (Please use separate sheet) Please also fax printouts of relevant files such as batch files and configuration files. When completed, fax this sheet to the appropriate Allied Telesyn office. Fax numbers can be found on page viii. -
Página 37: Appendix C
Allied Telesyn. The mailing address and fax number are at the bottom of the page. Your comments are valuable when we plan future revisions of this guide.