Publicidad
Idiomas disponibles
Idiomas disponibles
English
Quick Start Guide
With 4096 levels pressure and the
hover function, you can use Lenovo
Precision Pen as your fingers for more
great experiences.
① Overview
Bluetooth button
Indicator LED
Upper side button
Lower side button
Tip
② Installing a battery
1. Remove the cap in the direction
shown in the figure.
2. Place an AAAA alkaline battery into
the body of the pen with the
negative end down.
3. Put the cap back on the pen. Make
sure the flat surface of the pen
body is aligned with the flat surface
of the cap.
Note: AAAA alkaline batteries may
only be available in some countries
and regions.
③ Pairing a pen
1. Enable Bluetooth paring on your
device to discover and pair the pen.
2. Press and hold the Bluetooth
button on the pen for at least
3 seconds until the LED indicator
blinks white.
3. On your device, select Lenovo
Precision Pen and start pairing.
4. After pairing, press the Bluetooth
button on the pen to access more
functions. To access other
functions, double press the
Bluetooth button.
④ Placing the Lenovo Precision Pen
The Lenovo Precision Pen has a
magnet allowing it to attach to the
specific area of your device, making
the pen very portable.
With the tip of the pen pointed toward
the hinge, align the body of the pen
with the right/left edge of the device
cover.
⑤ Replacing the tip
1. Use your fingers to grip the pen tip.
2. Pull the pen tip out. Hold the nib
tightly and do not release it to
prevent the nib from falling.
Publicidad
