Getting Started - SOUNDMASTER KCD50 Manual De Instrucciones

FM TUNER
This unit is using build-in type FM antenna, you may need to adjust the unit position for maxing
signal strength.
CONNECTING POWER
The CD player can be using AC or DC to operate.
For DC battery, please insert 6x UM-2/C size batteries. (battery not included)
For AC power supply:
Before connecting the power, check that the mains voltage on the rating plate which is same as
the voltage in your area.
Plug the DC jack into back of the unit plug the AC adaptor (not included) into the wall socket.
The unit is now ready for use.
ON/OFF CONTROL
Press the "POWER" button (1) to turn the unit on:
The display will light and the unit will switch on.
Press the "POWER" button (1) again to switch the unit off.
ENERGY SAVING/ ERP2 REGULATION
This device is equipped with an automatic switch off / STANDBY system for energy-
saving requirements. This is regulated by an EU-standard and is
NOT A MALFUNCTION.
If the CD player turn to standby, press the "POWER" button (1) two times to switch the unit on
again. This is ERP2 power management.
ADJUSTING THE VOLUME
 Adjust the "VOLUME" control (14) to increase or decrease the volume level.
SELECTING A SOURCE
You can choose to listen to following sources by using "FUNCTION" switch (13) :
 FM
 AUX
 CD
 USB
Tune to FM radio stations
Position the unit as far as possible from TV, power adapter or other
radiation source.
Set the "FUNCTION" selector (13) to FM position.
1.
2. The FM indicator will light on.
Press the "FM SCAN" button (12) to search FM station with strong
reception automatically.
3. Repeat step 2 to tune to more stations.
4. If need to clear or reset the current station to beginning, press "FM RESET" button (11).

GETTING STARTED

FM RADIO
2
KCD50 / English Instruction Manual