Led Behavior - HP bt500 Manual De Instrucciones

LED behavior

The LED on the HP bt500 provides information about its
current state.
On steady—This is the default state and means the device is
installed and has power.
Rapid blinking—A sending device is "Discovering" the
HP bt500.
Blinking—The HP bt500 is receiving data.
General printing
Printing to your printer over Bluetooth should be fairly easy.
1. From your sending device, start the Discovery of available
Bluetooth printers.
2. Select the printer and enter the Passkey if prompted.
Note: Secure printing may require you to know the Passkey
of your printer.
More detailed information about printing from specifi c devices
will be found in the User Guide on the CD.
English
3