Technical Specifications - HK Audio ELEMENTS E 115 Sub D Manual De Instrucciones

8 Technical Specifi cations
E 115 Sub D
Max. SPL @ 10% THD 125 dB half space (40 Hz – X-Over averaged)
Max. SPL peak @ 10% THD 128 dB half space @90 Hz
Frequency response 48 Hz – X-Over
+/- 3 dB
Frequency response -10 dB 44 Hz – X-Over
Power output, Sub 1500 W
Power output, Mid/High 900 W
Units
Amp type Class D
Bass woofer 1x 15", 3" voice coil
Active x-over frequency 160 Hz
Analog ports 1x XLR Combo In bal.,
1x XLR Thru bal.
Speaker Outs 1x E-Connect, 1x Speakon
Cardioid Out 1x XLR
Network port Ethercon RJ45, 1x In, 1x Thru
Filter presets 1x E 835, 2x E 835, 3x E 835, Remote
Remote software DSP CONTROL (Windows, Mac OS)
DSP functions Fully parametric 10-band EQ with variable
fi lter characteristics, High-Pass Filter, Low-
Pass Filter, Polarity, Level, Delay, Limiter,
Mute
Sampling rate 96 kHz
System latency less than 2.6 ms
Mains connector 1x Powercon NAC3 In, 100–240 V
Power consumption 1 A / 100–240 V nominal according to EN
62368-1
Grips 2x MultiGrip
Housing MDF
Finish Black acrylic enamel
Front grille 2 mm metal grille backed with black acou-
stic foam
Dimensions (WxHxD) 48.5 x 48.5 x 59.5 cm
Weight 29,6 kg / 65.3 lbs
E 835 Mid/High Unit
Power handling, 300 W @ 8 ohms
nominal(RMS)
Axial sensitivity 1W/1m 100 dB Halfspace
Frequency response -10 dB 140 Hz – 20 kHz
Speakers 8 x 3.5" broadband
Directivity 70° horizontal
Corner frequency 140 Hz, 30 dB/oct.
Connectors 1x E-Connect In, 1x E-Connect Out
Dimensions (WxHxD) 11 x 74.5 x 12 cm (excl. E-Connect sleeves)
Weight 4.5 kg / 9.9 lbs
EP 1
0,94 m
min. 0,86 m
max. 1,52 m
EP 2
0,45 m
min. 0,37 m
max. 0,54 m
EF 45 for transportation
12,5 cm
41 cm
ELEMENTS E 115 Sub D 1.1
EF 45 in use
46 cm
9