Cannot Access Your Router Message - Linksys EA6350 V4 Manual Del Usuario


If your internet service is DSL, make sure that the DSL phone line is connected to the modem's DSL port.

If your computer was previously connected to your modem with a USB cable, disconnect the USB cable.

Install the router again.

Cannot access your router message

To access your router, you must be connected to your own network. If you currently have wireless internet access, the
problem may be that you have accidentally connected to a different wireless network.
To fix the problem on Windows computers, do the following*:
1. On your Windows desktop right-click the wireless icon in the system tray.
2. Click View Available Wireless Networks. A list of available networks will appear.
3. Click your own network name. Click Connect. In the example below, the computer was connected to another
wireless network named wraith_5GHz. The wireless network name of the Linksys EA6350 V4 router,
Damaged_Beez2.4 in this example, is shown selected.
14